![background image](http://html1.mh-extra.com/html/teufel/s-8000-sw/s-8000-sw_technical-description-and-operating-instructions_1093345005.webp)
5
Setup and connection
Screen
Stereo triangle
Center
S 8000 SW
Front
Center
Front
Rear
Rear
Setup notes
• Select a stable, level base.
• Make sure that the environment is clean and free from dust.
• Avoid placing the unit close to sources of heat or in direct
sunlight.
• Arrange the connector cables so that they do not pose a trip
hazard.
• Do not place any heavy objects on the cables or the speak-
ers.
• The location of the subwoofer can be freely selected and
does not influence the other speakers. However, do not place
it in the corner of a room as this may cause uncontrollable
frequency overloads. A location between the front speakers
is often ideal.
Connecting
Danger
Danger of injury/damage!
Arrange the cables so that they do not pose a
trip hazard.
• Pull the mains plug of your AV receiver out of the socket.
• Ideally, the subwoofer is connected to the subwoofer jack of
the AV receiver with a mono RCA cable.
• Normally, only the RCA jack
1
“LEFT MONO” on the back side
of the subwoofer is used for this purpose.
• The RCA jack
1
“RIGHT” is only occupied if you use a
Y adapter for the connection. This increases the subwoofer
level slightly.
• You will find more information on this in the operating in-
structions of your receiver.
• If your receiver does not have a connection for a subwoofer,
connect an available speaker outlet with an RCA jack
1
of
the subwoofer using a voltage reducer and an RCA cable. We
offer voltage reducers on our website in the “Accessories”
area.
Connection to a power supply
• Ensure that the mains switch
6
“Power” on the subwoofer is
switched off (“0 OFF” position).
• Connect the mains connector jack
7
with a mains socket
using the power cord.
• Also plug the mains plug of your AV receiver back into the
socket.
1
6
7
8