14
• ROCKSTER GO
Activating and
deactivating
Activating
– Push and hold the button
(8)
for approx. 2 seconds. The
ROCKSTER GO will be switched on
emitting a signal tone and the ring
around the button will illuminate
in red.
(8)
Deactivating
– Push and hold the button
(8)
for
approx. 2 seconds. The ROCKSTER GO
will be switched off emitting a
signal tone.
Auto off
• After 10 minutes without an input
signal, the device will automati-
cally switch to standby. As soon
as an input signal is present
again or a button is pushed, the
ROCKSTER GO will switch back on.
• If operated with power from the
integrated rechargeable battery,
the ROCKSTER GO will switch
to energy-saving mode after an
additional 10 minutes and can only
be switched back on by pushing
the button
(8)
.
Volume
– With the
– (4)
and
+
buttons
(6)
,
you can reduce or increase the
volume in 32 levels.
(4)
(6)
You can gradually adjust the
volume by tapping. Pushing and
holding will change the volume
continuously.
