8
Installation
1. Position the two speakers in your
room and connect them to each other
using the speaker cable provided.
ĕ
Make sure to use the provided
speaker cable or another cable
specified by the manufacturer. Do
not use a common cinch cable as this
may cause a loss of quality.
ĕ
You can choose which of the two
speakers you want to control with the
left stereo signal, and which with the
right, at a later stage.
ĕ
Please make sure that there is
room for a sufficient supply of air at
the back of each speaker.
2. Attach the active speaker to the
power supply and turn on the main
power switch on the back of the
active speaker.
Connecting the
Raumfeld Cube