15
• KB 62 CR
Inputs for source devices
Analogue sources
The KB 62 CR offers three inputs for
analogue audio sources:
•
AUX 1
RCA jacks
(26)
, back side
•
AUX 2 IN
RCA jacks
(16)
, front side
•
LINE IN
3.5 mm jack plug socket
(15)
, front
side
26
16
15
You can connect a source device with
analogue sound to each of these
inputs (e.g. a MP3 player or a TV set).
Digital source
You can connect the optical
digital sound output of a source
device to the OPTICAL IN jack
(22)
. You will need an optical
cable with a TOSLINK plug
for this. Your source device
requires either an optical 3.5 mm plug
or also a TOSLINK plug.
22
Record player
Most record players can be connected
to one of the aforementioned
analogue inputs.
The usually more expensive magnetic
(MM – “Moving Magnet”) or dynamic
pick-up systems (MC – “Moving Coil”),
require substantial amplification. This
is provided by the PHONO input
(25)
.
The GROUND point
(24)
connects the
ground line of the record player.
25
24
Speaker outputs
If possible, use the enclosed cables
⑦
or a comparable high-quality,
double-core speaker wire with a
diameter of at least 0.75 mm
2
to
connect the speakers. You can order
corresponding cables in our webshop
(www.teufelaudio.com) in the “Acces-
sories” area.
Connect the speakers to the
SPEAKERS connector terminal
(23)
.
23
Summary of Contents for KB 62 CR
Page 43: ...43 KB 62 CR...
