• KB 22 CR
13
10
32
41
48
15
The integrated clock shows the current time in the display .
The clock is set manually or by RDS when in radio mode .
There is also a sleep function (up to 90 minutes) .
Setting the time
Automatically with RDS
Select a radio station with RDS signal (see „Setting
the radio stations“ on page 14) . After a few minutes the
KB 22 CR will pick up the time signal from the radio sta-
tion and set the clock accordingly .
Manually
If no RDS station is being received, you can also set the
clock manually:
1 . Switch the unit to standby using button
15
or button
48
“ ” .
2 . Press button
41
“CLOCK” briefly once . The display will
show the current time .
3 . Press button
41
“CLOCK” and hold for 3 seconds . The
display will briefly show the message “CLOCK SET”
and then “CLOCK 24” or “CLOCK 12” .
4 . Set the clock to 24 hour or 12 hour operation using
volume control
10
“VOLUME” or button
32
“Vol +/–” .
5 . Press button
41
“CLOCK” briefly once . The display will
flash the hour .
6 . Use volume control
10
“VOLUME” or button
32
“Vol
+/–” to set the hour .
7 . Press button
41
“CLOCK” briefly once . The display will
now flash the minutes .
8 . Use volume control
10
“VOLUME” or button
32
“Vol
+/–” to set the minutes .
9 . Press button
41
“CLOCK” briefly once .
The time is now set .
Displaying the time
In order to show the time, press button
41 “CLOCK”
briefly . The display now shows the time for 3 or 90 sec-
onds (in standby and in EcoPower mode) .
Clock
KB 22 RC
