• iTeufel
®
Magnum
9
A 3-volt button cell, type CR2025 is used to power the
remote control .
At delivery, this battery is already in the remote control
and is secured by a plastic strip . The strip is visible on the
back of the remote control . Just pull it out carefully . The
remote control is now ready for use .
Changing the batteries
• Hold the remote control with the bottom facing up .
• Push the bar of the battery compartment towards the
middle (
A
) and pull out the compartment (
B
) .
• Take out the empty batteries (please observe the notes
on page 16) .
• Insert the new battery in the bracket . In the process,
the “+” symbol must be visible on the battery and
bracket .
• Put the bracket back into the unit and push the com-
partment until it locks into place .
Functionality
The remote control transmits infrared control signals .
For this, it is necessary that you point the remote control
towards the iTeufel
®
Magnum . Ensure that no objects are
in the way of the infrared signal .
Fluorescent lamps and energy-saving lights installed in
the direct vicinity may affect the functions of the remote
control or may even fully impair them .
Remote control
A
B
