10
Teufel
·
Impaq 400
Rear side IP 400 DR
Q
Digital audio outputs
These can be used to connect the Impaq 400 DVD
player to a 5.1 receiver.
W
HDMI output
Use the HDMI cable to connect this output to
your television in order to achieve the best pos-
sible image reproduction.
E
RGB components and composite
video outputs
( yellow)
Use these outputs to connect to a TV with RGB
component inputs or a composite connection
( yellow socket).
R
S-Video outputs
You can connect the IP 400 DR to your television
using the appropriate video cable.
T
Downmix audio output
You can connect a two-channel amplifier to this
output.
Y
2.1 speaker outputs
Connect the speaker set supplied to these
outputs. During set-up please note the L (left
speaker), R (right speaker) and SUB (subwoofer)
labels and observe the correct polarities on the
devices.
U
SCART OUTPUT
Use this output to make a SCART connection with
your TV.
I
Audio inputs
Use these inputs to connect other signal sources.
O
Digital audio inputs
You can connect a compatible digital audio appli-
ance here. Use either a coaxial audio cable or an
optical cable connection.
You can connect digital sound sources using Dolby
Digital, MPEG-2 or DTS formats via this input.
To do this, set the output in the set-up menu to
PCM.
P
Aerial inputs for the tuner
Connect the AM and/or FM aerials here.
AnT
GnD
AM 300
Ω
FM 75
Ω
Opticial Coaxial
R3
R2
R1
L3
L2
L1
Audio In
HDMI
Cb/Pb CVBS S-Video
Cr/Pr
Lt
Rt
Digital Out
Video Out
Audio Out
Scart Out
Speaker Output
L
R
SUB
4
Ω
4
Ω
4
Ω
220 – 240 V
~
50/60 Hz
250 Watt
Mains
Power
y
Speaker Output
L
R
SUB
4
Ω
4
Ω
4
Ω
P
O
I
U
Y
Q W
E
R
T
