• Concept E 450 Digital
13
Operation
Switching the device on/to standby
Activating
•
On the device:
Briefly push the button
(10)
.
•
With the remote control:
Briefly press the middle
of the control dial
(20)
.
The following LEDs illuminate when the device is
activated:
– the selected input (
1, 2, 4, 5, 6 or 13
)
– the volume display
– the active speakers (5.1 or 2.1)
– the audio format of the input signal
The last settings that were used will still be active
even after the device has been turned on.
Switching to standby
•
On the device:
Briefly push the button
(10)
.
•
With the remote control:
Push and hold the middle
of the control dial
(20)
for approx. 3 seconds.
The button
(10)
will illuminate in standby.
Selecting an input
•
On the device:
Push the button
INPUT SELECT
(3)
repeatedly until the LED of the desired input
illuminates.
•
With the remote control:
Push the side button
(22)
repeatedly until the LED of the desired input illumi-
nates
(1, 2, 4, 5, 6
and
13)
.
• You can select the Bluetooth and USB inputs by
tapping the button
(6)
or
(13)
.
Volume display
approx.
3 seconds.
20
22
10
1
2
3
4
5
6
13
Functions
• Activating the Concept E 450 Digital: Push the mid-
dle of the control dial
(20)
.
• Switching the Concept E 450 Digital to standby:
Push and hold the control dial
(20)
for 3 seconds.
• Adjusting the volume: Turn the control dial
(20)
.
• Activating/deactivating mute:
Briefly press the control dial
(20)
.
• Selecting the input:
Push the side button
(22)
(repeatedly). Pushing
the button selects the next input (see table on the
right).
Selected input
LED illuminates:
LINE IN
(24)
5.1 CH
(1)
ANALOGUE IN
(27)
2.1 CH
(2)
DIGITAL IN COAXIAL
(26)
COAX
(4)
DIGITAL IN OPTICAL
(25)
OPT
(5)
BLUETOOTH
(6)
USB
(23)
(13)
