T
U
I
O
O
9
·
Cinebar 50
Cinebar 50 back · Subwoofer connection
Please note
The Cinebar 50 System inde-
pendently recognises whether
the subwoofer output is being
used. If the jack is being used,
the sound will be adjusted
accordingly. If you are using the
subwoofer, this should always
also be switched on.
Note
If you want more powerful bass
effects, you can connect a larger
or second active subwoofer to
the subwoofer output.
Cinebar 50 Unit back
Q
Power supply
Connect the appropriate power supply cable to
supply the Cinebar 50 Unit with power.
W
Analogue audio inputs
Use the Aux 1 and Aux 2 stereo inputs to connect
analogue signal sources. Use normal cinch cables
for the connection.
E
Digital audio inputs
You can connect compatible digital audio appli-
ances here. You can use either a coaxial or an
optical cable connection. You can also feed in en-
coded, multichannel surround data using these
inputs.
R
Subwoofer output
Connect the subwoofer to the Cinebar 50 System
here. The cut-off frequency is set at 150 Hz.
Connection to the subwoofer
The subwoofer is directly connected to the Cine-
bar 50 Unit using the cinch cable supplied. If the
cable isn’t long enough you can use a longer, pre-
ferably high-quality cinch cable.
Subwoofer back
T
Cinebar In
Connect this jack to the subwoofer output of the
Cinebar 50 unit.
Y
Auto
This switch activates the automatic switch-on
function of the subwoofer. If there is an audio si-
gnal at the input, the subwoofer will switch on. If
there is no signal for a few minutes, the subwoo-
fer will switch to standby mode.
U
Volume
You can adjust the global output volume of the sub-
woofer using the level control. Please read the “Sub-
woofer volume” section on page 12.
I
Power
This rocker switch is used to switch the subwoo-
fer on and off.
O
Power supply
Connect the appropriate power supply cable to
supply the subwoofer with power.
Explanation of symbols
The arrow-headed lightning
symbol in an equilateral triangle
indicates the presence of a
dangerous non-insulated elec-
trical voltage within the system
housing and therefore a risk of
electrical shock.
The exclamation mark in an
equilateral triangle, as affixed
to the appliance, is to make
the user aware of important
operating and maintenance
instructions.
This product complies with
European Community guidelines
2004/108/EC and 2006/95/EC
The dustbin symbol printed
on our products’ type plates
and amplifiers states that
Lautsprecher Teufel guarantees
proper disposal of these speakers
and subwoofers in line with the
Electrical and Electronic
Appliance Act.
This product is a safety class II
product in accordance with DIN
standard EN 61140 (VDE 0140-1)
and IEC 60417 and does not re-
quire a safety plug, only the plug
supplied (2-pole). The casing has
reinforced or double insulation
against electric shock.
Attention
The separating equipment of
this equipment is the mains
plug, this separating equipment
must be usable without
difficulties.
W
E
R
Audio cable
Q