Teuco HYDROSONIC, Installation Manual

Page: 9 / 76

REMOVING THE PANELS
1
PANELLED BATHTUBS ONLY
Bathtub with 3 panels Bathtub with 2 panels Bathtub with 2 panels Bathtub with front panel Corner bathtub
with front panel
A B
Lever the panels off at the points indicated, using a screwdriver (A), and detach (B) from the retaining clips.
Remove the panels in the sequence indicated: 1-2-3.
Examples of panelled tubs
LEVELLING THE TUB
2
Position the bathtub in the selected place and level up, first by
adjusting the outermost feet, then bringing the middle feet into
contact with the floor.
Make the adjustment so as to leave a distance of 15 mm
minimum between the floor and the bottom edge of the panel
to allow for ventilation of the whirlpool system.
9
GB