4 Zone DMX and RF wall panel
for Tunable White LED strip
www.teucerled.co.uk
V002-11-2019
Controlling the LED strip
Sound ON/OFF:
When OFF press and hold the Power
button for more than 5 seconds until you hear the
chime. Sound is now turned off. Repeat the procedure
to turn the sound back on.
• ON/OFF:
Turn ON/OFF LED strips on the last setting.
• Brig/-:
To adjust the brightness for the
selected Zones, press + or - touch buttons.
• Zones:
When ON choose the Zones you wish to
control. When OFF short press Zone to turn ON
current Zone, long press for 2s to turn OFF the
desired Zone.
• Scene:
Long press 2s to save current settings to
Scene, short press to retrieve saved scene.
POWER
ZONE
ZONE
ZONE
ZONE
S
SCENE
BRIGHT
BRIGHT
FRONT
BACK
Scene
ON/OFF
AC INPUT L
AC INPUT N
WP-4TWN
DMX OUTPUT D+
DMX OUTPUT D-
DMX OUTPUT GND
Zones
Brightness
+/-
CCT touch
slider
L
N
GND
D+
D-
DMX OUTPUT
INPUT
85-265VAC
86mm
86mm
45.5mm
59mm
35mm
62mm
11.5mm
Compatible
Back box types:
European style
86 size
Back box mounting
Wall panel
Bracket
Back box
Bracket removal
Problem
Cause
Corrective
No light
• No power.
• Wrong connection or unsecure
connection.
• Check the power.
• Check the connection.
Wrong Colour
• Wrong connection of RGB/W wires.
• Retrace and reconnect RGB/W
wires.
Uneven intensity
between front and
rear of the strip, with
voltage drop
• Output cable is too long.
• Cable diameter is too small.
• Overload beyond driver capability.
• Overload beyond receiver capability.
• Reduce cable or loop supply.
• Change to a thicker cable.
• Replace with a suitable higher
power driver.
• Add a power repeater.
No response
from the remote
• The wall panel has no power.
• Beyond controllable distance.
• The controller isn’t synchronised
with the remote.
• Check the incoming supply to the
wall panel.
• Reduce remote to receiver
distance.
• Re-sync the remote.
Troubleshoot
• Products must be installed and serviced by qualified electrician.
• Please ensure the receiver is mounted in a water proof enclosure if installed in an outdoor environment,
avoiding metallic enclosures.
• Always ensure products are mounted in areas with adequate ventilation to avoid overheating.
• Please ensure outputs of any power suppliers used in conjunction with this product comply with its
working voltage.
• Never install product whilst connected to power and double check connections before switching on to
avoid short circuits.
Safety
Warranty
Should this product fail during the 5 year warranty period it will be
replaced free of charge, subject to the correct installation of the original
product in accordance with applicable and appropriate electrical
codes and instructions provided by Teucer, as well as subsequent
return of the faulty unit. Teucer does not accept responsibility for any
installation costs associated with the replacement of this product
and Teucer reserves the right to alter specifications without prior
notice. For further information, please see our Terms and Conditions.
www.teucerled.co.uk/terms-and-conditions/
Teucer (UK) Ltd
Bedford House, Fulham Green
69-79 Fulham High Street
London, SW6 3JW, UK
Tel: +44 (0)20 7350 4429
Fax: +44(0)20 7228 4647
www.teucerled.co.uk
