Receiver wiring diagram
Remote controller layout
Brighter for longer
CONTROLLER AND RECEIVER
www.teucerled.co.uk
• Do not connect power before wires are connected to the receiver and the driver.
• Please check weather the input voltage of the constant voltage driver is in accordance with the controller, and check
connection of both positive (+) and negative(-) of the LED strip.
• Please do not use the controller in an area saturated with wireless products (interference) nearby, otherwise, the re-
mote’s transmission distance will be seriously affected.
• It is important to ensure your fingers are not making contact with the colour wheel when installing the batteries.
• It is not recommended to use CAT5 cable to connect any Teucer product.
LR-W and LRR-W
1 zone RF controller and receiver for single colour LED strip
ON
bu�on
OFF
bu�on
Highest brightness
Brightness wheel
Lowest brightness
Medium brightness
ON
OFF
