Teucer (UK) Ltd
Head office
Bedford House, Fulham Green, Fulham High Street,
London, SW6 3JW, UK
Tel: +44 (0)20 7350 4429
Fax: +44(0)20 7228 4647
www.teucerled.co.uk
[email protected]
Logistics Centre
Trident Court,
1 Oakcroft Road,
Chessington,
Surrey, KT9 1BD, London, UK
Tel: +44(0)20 7350 4429, extension: 401
Controlling your LED strip
Brighter for longer
CONTROLLER AND RECEIVER
www.teucerled.co.uk
Warranty
• Products must be installed and serviced by qualified
electrician.
• Please ensure the receiver is mounted in a water proof
enclosure if installed in an outdoor environment,
avoiding metallic enclosures.
• Always ensure products are mounted in areas with
adequate ventilation to avoid overheating.
• Please ensure outputs of any power suppliers used in
conjuction with this product comply with its working
voltage.
• Never install product whilst connected to power and
double check connections before switching on to
avoid short circuits.
Safety
Should this product fail during the 3 year warranty
period it will be replaced free of charge, subject to the
correct installation of the original product in accordance
with applicable and appropriate electrical codes and
instructions provided by Teucer, as well as subsequent
return of the faulty unit. Teucer does not accept
responsibility for any installation costs associated with
the replacement of this product and Teucer reserves the
right to alter specifications without prior notice. Teucer
can offer 5 year warranty upon request. For further
information, please see our Terms and Conditions.
www.teucerled.co.uk/terms-and-conditions/
Touch sensi�ve
colour wheel
ON/OFF
Decrease brightness
Increase brightness
Play mode
Colour bu�ons
Scene save / recall
Play mode speed
LR-RGB/RGBW and R4C
1 zone RF controller and receiver for RGBW LED strip
• To change colour, use the
colour wheel.
• To alter the brightness,-
press the colour buttons
(RGBW) then press the
increase / decrease
brightness buttons. The
brightness will change to
the desired level.
• There are several dynamic modes, press the play mode button to browse thorugh modes. To
choose the mode, press and hold play mode for 2seconds.
• There are 10 speeds for the play modes. Press the speed button to browse through the speed
levels.
• Press and hold the speed button to go tho the highest speed level.
• To save a favourite colour, press and hold scene buttons.
• To recall saved setup, press scene button.
