Teucer (UK) Ltd
Head office
Bedford House, Fulham Green, Fulham High Street,
London, SW6 3JW, UK
Tel: +44 (0)20 7350 4429
Fax: +44(0)20 7228 4647
www.teucerled.co.uk
[email protected]
Logistics Centre
Trident Court,
1 Oakcroft Road,
Chessington,
Surrey, KT9 1BD, London, UK
Tel: +44(0)20 7350 4429, extension: 401
Controlling your LED strip
Brighter for longer
CONTROLLER AND RECEIVER
www.teucerled.co.uk
With LR-8RGBW one can adjust the brightness and colour temperature of the RGBW LED strip.
•
Choose the zone(s) you wish to control.
Select as many zones as you wish.
• Touch the colour wheel to change colours.
•
Press and hold R/G/B/W to individually
dim them up or down.
•
Choose one of 10 pre-set play modes.
•
Speed up or slow down the play modes.
5
6
7
8
1
2
3
4
Click to switch ON/OFF
Red channel:Click to turn off/on, Press and
hold down to increase/decrease light intensity
Green channel:Click to turn off/on, Press and
hold down to increase/decrease light intensity
Blue channel:Click to turn off/on, Press and
hold down to increase/decrease light intensity
White channel:Click to turn off/on, Press and
hold down to increase/decrease light intensity
Play & pause mode, click to play or pause
running mode
Save color, press and hold down to save,
click to recall the saved
Return to previous status
Speed up, press and hold down
to speed up the running mode
Speed down, press and hold down
to speed down the running mode
Brightness up, press and hold down to
increase light intensity
Brightness down, press and hold down
to decrease light intensity
5
6
7
8
1
2
3
4
8 zones, click to select a zone,
press and hold down to turn on/off
corresponding zone
Warranty
•
Products must be installed and serviced by qualified
electrician.
•
Please ensure the receiver is mounted in a water proof
enclosure if installed in an outdoor environment,
avoiding metallic enclosures.
•
Always ensure products are mounted in areas with
adequate ventilation to avoid overheating.
•
Please ensure outputs of any power suppliers used in
conjuction with this product comply with its working
voltage.
•
Never install product whilst connected to power and
double check connections before switching on to
avoid short circuits.
Safety
Should this product fail during the 3 year warranty
period it will be replaced free of charge, subject to the
correct installation of the original product in accordance
with applicable and appropriate electrical codes and
instructions provided by Teucer, as well as subsequent
return of the faulty unit. Teucer does not accept
responsibility for any installation costs associated with
the replacement of this product and Teucer reserves the
right to alter specifications without prior notice. Teucer
can offer 5 year warranty upon request. For further
information, please see our Terms and Conditions.
www.teucerled.co.uk/terms-and-conditions/
LR-8RGBW and LRR-WTC
8 zone RF & WIFI controller and receiver for RGBW LED strip