4-14
OPERATION
CHAPTER 4
DN-109AT, DN-119AT, DN-129AT and DN-189AT display series
4.5.2.
User interface
Ethernet connection allows a new interface, much easier than the usual in displays. All
configuration can be done through a website hosted at the display, so the user only needs a device
connected to the LAN with web browser (computers, smartphones, tablet
s…). There is no contact with
the display, which usually is in a difficult access point. The web page can be accessed remotely if the
router is correctly redirected. See
¡Error! No se encuentra el origen de la referencia.
for more
information.
The main page shows the value of the display, as well as the measurement name and unit
(configured by the user) and the relays status (if option added). This main page is for the user to
control the status of the display.
In the left menu there are three tabs: Configuration, Ethernet and alarms, accessible through
user and password:
User: admin
Password: 12345678
First tab allows the user to configure the same parameters as the parameter menu in an
easier and more intuitive way. Using this menu, the user selects the input (Pt100, Pt1000,
thermocouple J, K or T), measurement unit (ºC or ºF), resolution and offset.
