Tetra EasyCrystal 250, Instruction Manual

Page: 7 / 85

7
UK
PRODUCT BASICS
Product description
The Tetra EasyCrystal Filter 250 is a filter for aquariums. Its tri-
ple filtration (mechanical, biological and chemical) produces
crystal-clear, healthy water for your ornamental fish and aquatic
plants.
Fig. A Description
1 Tetra EasyCrystal filter cartridge C 250/300
• The white side is the coarse filter and faces the back.
• The green side is the fine filter and faces the front.
2 Tetra BioFoam filter foam to encourage the settlement of
beneficial bacteria.
3 Slot for Tetra BioFoam filter foam.
The side labelled “FRONT” faces forward.
4 Plug
5 Bracket and suction cup with long shaft for attaching the
filter to a Tetra AquaArt Discovery Line Aquarium.
6 Suction cups with short shafts for attaching the filter to a
standard aquarium.
7 Filter housing
8 Pump housing
Intended use
Use the EasyCrystal Filter only
• to filter aquarium water,
• in indoor areas,
• for private use,
• in line with the technical data.
SET-UP
NOTE
To stop the filter pump from drawing up sand from the aquari-
um, there must be more than 10 cm distance between the filter
and the sand.
Attaching the EasyCrystal Filter to a Tetra AquaArt Discovery
Line Aquarium
Procedure:
Fig. B
1. Install the bracket at the desired height (I, II or III).
2. Install the suction cup with the long shaft.