Tetra Pak Hoyer Frigus 600, Manual

Page: 15 / 112

Tetra Pak
Hoyer
3-13
B F60 03 C 04
3.3. Improper use
Though the machine is equipped with a number of
safety systems, operators must be very careful to
make sure that no situations arise which could
potentionally put them or others in danger.
The machine is designed and built exclusively for
the use described in chapter 3.1. Any other use must
be considered improper and unreasonable. The
manufacturer shall not be held responsible for any
damage caused by improper, erroneous or
unreasonable use.
Everyone who works on the machine must be
adequately trained in thecorrect working methods
and informed of the nature and functioning of
safety devices.
3.4. Demolition and disposal
Information of use for disposal of the machine
and its components.
The machine must be demolished by specialised
personnel wearing appropriate safety garments
and working in compliance with safety and
environmental legilation.
Construction materials:
- steel, stainless steel, aluminium, cast iron
- copper, silver in electrical components
- rubber, nylon, PVC, resins and fibres.
No component is toxic or harmful.
Dispose of reducting gears carefully as they are
full of oil.
Do not abandon these components or dispose of
them with regular waste.
WARNING! When finished using
machines and components, dispose of them in
accordance with the laws in effect in your country.
3.5 Warnings, prohibition and danger signs
WARNING :
Dismantling side panels (anchored in place with
screws) permits contact with moving parts.
A
moving parts
sign must be positioned on the
panels.
WARNING :
The doors of the electric board can be opened
using the tools supplied with the machine.
The opening of the doors disconnects the
components downstream from the main swutch.
Some components may continue to be powered
by residual current for a specific interval of time.
After opening the machine, avoid touching the
internal parts for at least 5 minutes.
A sign indicating the presence of
powered parts
is placed on the door.