The Case Relay External Power System (EPS) lets you power your
camera continually with an external battery pack, providing peace
of mind knowing you have an uninterrupted power source for your
camera.
If you’re shooting and power gets low on the primary external battery
power bank, simply swap out the power bank. Your camera will not
turn off. Power will continue to flow to your camera with the Case
Relay EPS internal 1200mAh battery. Utilizing a wall outlet or external
power banks, you could theoretically shoot forever with uninterrupted
consistent power.
USAGE STEPS
Step 1: Find the correct Relay Camera Coupler for your specific
camera at www.TetherTools.com/Relay then click on the Shop by
Camera section to find the compatible coupler.
Step 2: Plug the Case Relay EPS into the Relay Camera Coupler (sold
separately).
Step 3: Plug the Case Relay EPS USB port into an external power
bank or wall charger. Note: 5V, 2A external power bank or 2.4A USB
wall charger is required to power Case Relay EPS.
Step 4: Insert the Relay Camera Coupler into your camera.
Step 5: Turn on your camera, and enjoy the peace of mind knowing
you have an uninterrupted power source for your camera.
Step 6: Monitor your primary external power bank throughout the
shoot. The Case Relay EPS battery will show a Red indicator light
when power is low. Swap out external power banks as needed.
Note: Case Relay EPS secondary internal 1200mAh battery is as large
as many regular camera batteries and can support shooting and all
camera features while swapping out primary external battery banks.
