background image

WARRANTY 

• 

This product is warranted to the initial purchaser
to be free of defects in materials and manufacture
workmanship at the time of initial purchase and for
a period of 2 years after. Some parts are consumable
(e.g. rubber gaskets and o-rings) and may need to
be replaced as part of ongoing product maintenance
and are not covered by this Warranty. In the event
this unit malfunctions within 2 years from the date
of purchase, the sole obligation of Teton Dynamics
(hereinafter referred to as Teton) will be to repair
the unit or replace with an equivalent new or factory
refurbished unit at Teton’s discretion, subject to the
following condition:

• 

The malfunction is proved attributable to a
defect in materials or manufacture workmanship, 
including repairs performed under this warranty. 
Malfunction for any other reason including but 
not limited to misuse, negligence, accident, or 
tampering with parts, incorrect wiring, or im
proper installation will not be remedied under 
this warranty.

• 

Teton specifically does not guarantee chemical 
compatibility, and expressly does not warrant 
units from any problems caused by chemical 
attack or failure due to incompatibility of fluid 
used near this aeration system.

• 

All warranty repairs must be performed by Teton  
or a Teton authorized company.

• 

Purchaser must retain the purchase receipt 
and present it with this certificate as proof of 
ownership and entitlement to warranty repairs. 
Unauthorized repairs will not be compensated 
by Teton, and are not the responsibility of Teton, 
and if such repairs damage the product, such 
damages are not remedied under this warranty.

• 

Purchaser shall bear all onsite labor, shipping, 
packing and insurance costs and all other costs, 
excluding in house labor and parts necessary to 
effectuate repairs under this warranty. 

• 

This warranty is in lieu of all other express
warranties which now or hereafter might otherwise 
arise with respect to this product. Any and all 

limited warranties, including the warranties of 
merchantability and fitness for particular
purpose, shall have no greater duration than the 
duration period of the express written warranty 
applicable to this product, and shall terminate 
automatically the expiration of such duration 
period. 

• 

Some states do not allow limitations on how 
long an implied warranty lasts, so the above 
limitation may not apply to you. No action shall 
be brought for breach of any implied or 
express warranty after one year subsequent to the 
expiration of the duration period of the express 
written warranty.

• 

Incidental and consequential damages caused 
by malfunction, defect, or otherwise, and with 
respect to breach of any express or implied 
warranty, are not the responsibility of Teton, and to 
the extent permitted by law, are hereby excluded 
for property damage, loss of livestock and, to the 
extent not unconscionable, for personal injury 
damage. Some states do not allow the exclusion 
or limitation of incidental or consequential 
damages, so the above limitation or exclusion may 
not apply to you.

• 

This warranty does not apply to any malfunction 
arising out of any application of this product 
other than normal use, unless such application is 
upon request specifically approved in writing by 
Teton.

• 

The provisions of this warranty are severable 
and if any provision shall be deemed invalid, the 
remaining provisions shall remain in full force and 
effect.

• 

Rights under this warranty are not assignable 
without the express prior consent in writing 
by Teton and, regardless of the terms of such 
consent in writing, such assignee shall have no 
greater rights than his assignor had against 
Teton.

Please consult your retailer for quality original Teton

® 

replacement parts.

Visit 

www.tetonus.com

 for your nearest dealer.

800.752.0399

[email protected]

 

Teton 

Page 14

Summary of Contents for Natural Reliability XTP Series

















Reviews: