6
Usage and Storage Instructions
EN
•
Press the button . The device switches on with Fr
manual mode. On the display appears Fr
- Selecting the temperature
1.
Use the button “+” to increase the set temperature
up to a maximum of 35°C.
2.
Use the button “–” to reduce the set temperature
down to a minimum of 10°C.
The set temperature is shown on the display.
The heater switches off as soon as the room reaches the
set temperature. The fan continues to run for several
seconds to prevent a build-up of heat.
If the room temperature falls below the set temperature,
the heater and fan switch on again automatically
-Setting the clock
Days
Hours
Minutes
1.
To switch the clock, press the “C/M” button.
The display shows
and the hours flash.
2.
Press the “+” button to increase the hours.
3.
Press the “-” button to reduce the hours.
4.
Press the “C/M” button again. The minutes flash.
5.
Press the “+” button to increase the minutes.
6.
Press the “-” button to reduce the minutes.
7.
Press the “C/M” button again. The days flash.
8.
Press the “+” button to increase the days.
9.
Press the “-” button to reduce the days.
- The appliance has a timer with which you can set the
required operating time. The appliance switches off
automatically once the operating time has expired
Timer
1.
To switch the timer, press and hold the “C/M” button
for 3 sec.
2.
The display shows and the hours flash.
3.
Press the “+” button to increase the hours.
4.
Press the “-” button to reduce the hours.
5.
To switch off the timer, press and hold “C/M” button
until is no longer displayed.
•
Programming modes
To switch on the programming mode, press the “PRO”.
The display shows
Heating
Comfort
mode
ECO
mode
Hour
The appliance has seven working modes between P1
and P7.
Press the “+” and “-” button repeatedly until desired
working mode is shown on display
