Tesup MASTER 940, User Manual

Page: 16 / 33

TESUP MASTER 940 (MADE IN EUROPE)
~ 16 ~
TESUP
6.1 MODIFICATIONS OR CHANGES BY THE USER:
▪ The wind turbine system is in conformity with the European Machinery Directive
2006/42/EC provided only original MASTER940 components are used and subject to
proper erection. The use of components from other manufacturers as well as
modifications or changes to the wind turbine system by the user are prohibited and
could render the declaration of conformity invalid!
6.2 RESIDUAL RISKS:
▪
Any residual risks which arise because of operation or maintenance are described in
the relevant sections of these instructions.
6.3 PERSONNEL REQUIREMENTS:
▪ All work on the wind turbine system must be carried out by authorised persons! Such
persons must be familiar with the safety devices and regulations prior to carrying out
the work.
▪
Authorised persons are defined as follows:
Operating mode Necessary qualifications
Erection Suitably trained persons
Normal operation Trained personnel
Cleaning Trained personnel
Maintenance Suitably trained persons
Repair Manufacturer
PERSONNEL REQUIREMENT TABLE
No. Component Function
1 Wind turbine Converts wind energy into electrical energy
2
Switch AC Emergency
Stop Button Emergency shutdown. When pressed, the wind turbine must be
short-circuited.
3 Charge controller
Generates electrical voltage (12/ 24 / 48 VDC Optionally).The
TESUP charge controller.
4 Battery Stores electrical energy (Acid, Gel)
5 Solar panels Convert solar energy into electrical energy
6 To Inverter Converts 24/48 VDC into 110/220 VAC
6. SAFETY INFORMATION