Tesup ATLAS X, User Manual

Page: 7 / 32

7
3.1 INTENDED USE
3.
T
EC
HNI
CAL D
ES
C
RIP
TIO
N
•
The wind turbine system may only be used as a “small wind turbine sys-
tem” (SWTS) to generate power in accordance with EN 61400 - 2.
•
The wind turbine system may only be operated in accordance with the rat-
ings and in the approved wind class (refer to the technical data).
•
Observance of the original instructions and compliance with the mainte-
nance and repair instructions are essential preconditions of use for the in-
tended purpose.
3.2 REASONABLY FORSEEABLE MISUSE
•
All forms of use which deviate from or exceed the limits of use described
above are contrary to the intended purpose. The manufacturer is not liable
for any damage resulting from such use.
•
No liability will be accepted by the manufacturer if the equipment has been
altered as well as in the event of improper assembly, installation, start
- up,
operation, maintenance, or repair.
•
Only original parts supplied by the manufacturer are approved as spare
parts or accessories. Any spare parts or accessories not supplied by the
manufacturer have not been tested for operation and could be detrimental
to reliability. No liability will be accepted by the manufacturer for any dam-
ages which result from the use of non
- approved spare parts or accesso-
ries.
•
Reasonably foreseeable misuse includes:
•
Operation outside the manufacturer’s specification.
•
All modifications or changes to the wind turbine system without the
manufacturer’s written approval!
•
Use of parts other than ATLAS X original parts.
•
Operation in non - approved SWTS classes.
•
Operation in strong winds or hurricanes.
ATLAS X (MADE IN EUROPE)