Page 5 of 5
Version: 3
Charisma™ LED Double Sided Light Box - XSD Series
Page 5 - Repair Instructions - Light Replacement:
1. Unplug unit from wall.
2. Remove thumb screws from light strip.
3. Unplug the light strip male/female connectors, then remove the light strip.
4. Put new strip on the channel, with the glide turned parallel to the channel and dip the glide
into the channel.
5. Reconnect the new light strip to the adjacent connections.
6. Tighten the thumb screws to secure the knobs. If a knob doesn’t engage, unscrew the glide
until it is almost off, then try again.
7. Plug in the unit.
ELECTRICAL NOTE:
This sign is intended to be
installed in accordance with the
requirements of Article 600 of
the National Electrical Code and/
or other applicable codes. This
includes proper grounding and
bonding of the sign.
1.
2.
3.
4.
5.
7.
6.
Lift out after
disconnected
3a.
3a.
3b.