Page 4 of 5
Version: 3
Page 4 - Install the Graphic
1. Plug frame into wall outlet.
2. To install the graphic, take the corner with the pull tag on it and press about 6”-10” of silicone into the frame channel
corner A. Repeat for the opposite corner B. Repeat for the next corner C. Lastly, repeat for the final corner D.
3. After all corners are pressed in, press the silicone into the frame channel at the mid-points on all four sides.
4. Press silicone into frame evenly between the corner and midpoints.
This prevents the graphic from bunching up or stretching too much and will ensure a smooth and tight fit.
5. Repeat steps 1-4 on the second side.
6. To remove the graphic from the frame, simply pull up on the pull tag.
NOTE: Model shown below may differ from your model, but assembly instructions remain the same.
Charisma™ LED Double Sided Light Box - XSD Series
2.
4.
3.
6.
A
pull tag
B
D
C
5.
1.