Page 1 of 5
Version: 3
Page 1 - Assemble the Frame
First start by assembling corners. There are three (2) brackets per corner. All extrusion sections are numbered
to identify which pieces go together, 1 with 1, 2 with 2, etc.
1. Insert the bent bracket into the extrusion where shown. Tighten the first screw on the bracket ~75% only.
Take the mating extrusion piece with matching number, guide the corner brackets in and tighten the
second pair of screws ~75%. Do not fully tighten.
2. Repeat assembly steps for the three remaining corners. Fully tighten all bracket screws.
3. For larger boxes, sides may be built in multiple sections. These sections end in a straight cut (NOT a 45⁰
angle). Use the two (2) straight brackets to connect the two adjoining sections. The screws will be tightened
from the inside of the frame. Sections can be identified with matching numbers.
4. If provided, place center support bar bracket into frame channel and use the Allen key to expand the
bracket inside the channel to secure it in place.
Charisma™ LED Double Sided Light Box - XSD Series
4.
1a.
1
Corner 4
Corner 3
Corner 2
2.
1c.
1
1
1
1
1b. Tighten screws only ~75%
Tighten
screws only
~75%
Fully tighten
all bracket
screws
3a.
3b.
Support Bar
2
2
2
2
1