7 testo REXS Testing/Programming GUI
31
7.6.
Operation of the testo REXS GUI
Connect testo REXS to power and gas supply and perform the start-
up procedure, until „IDLE“ is
displayed on the testo REXS display.
Start the GUI by clicking
Start -> all programs ->
Testo ->
REXS GUI -> REXS GUI Vx.xx
. The
GUI will open and automatically run.
If the test stand setup has changed, click edit config and update the application description.
Confirm by clicking OK.
Fig. 7.2: Edit configuration window
Note:
All data entered in edit config and edit port are stored and will be recalled if you
run the GUI the next time.
If the COM port has changed, click edit port and select the appropriate COM port from the pull-
down menu. All other settings are not modifiable. Confirm by clicking OK.
Fig. 7.3: Edit port window
Summary of Contents for REXS
Page 1: ...testo REXS User Manual...
Page 41: ......
