manualshive.com logo in svg

TESTO 925, Instruction Manual

Share
Download
TESTO 925 Instruction Manual Download Page 15

35

i

Press 

several times until the desired value is

displayed.
- The following are displayed in turn:

·

Hold

: the recorded reading

·

Max

: Maximum value

·

Min

: Minimum value

· The current reading

- In addition to the recorded, maximum or minimum

readings, the 2nd reading line shows the current
reading 

²

Resetting tthe m

maximum/minimum vvalues: 

The maximum/minimum values of all channels can be
reset to the current reading.

This function is not available if the Auto Hold function
is switched on. 

1

Press 

several times until 

Max

or 

Min

lights up.

2

Press and hold 

.

- The displayed value flashes twice. All maximum and

minimum values are reset to the current reading

²

Printing rreadings:
The readings shown on the display (current reading,
recorded reading or max./min. reading) can be printed
out. 
A Testo printer is required (accessory part).

With the Max./Min. print function switched on, the
maximum and minimum values are printed out as well
as the current reading or recorded reading.

º

See the chapter 

P

ERFORMING SETTINGS

.

1

Configure the instrument so that the value to be
printed is shown on the display.

2

Press .

de

en

fr

es

it

pt

sv

nl

??

??

6. Measuring

1.888.610.7664 

[email protected]

www.

Testo-Direct

.com

Summary of Contents for 925




















Reviews:

No comments

Brands by name

Popular brands

Load more brands