19
Instrument configuration
Auto of
f function: On/Of
f
Power supply
Simultaneously
AUTO-OFF
O
ON
N
OFF
AUTO-OFF
O
OF
FF
F
ON
Power save function / Power supply
The
button enables you to change to the current
measurement from every menu item.
ESC
Location
i
The
button has to be kept pressed for approx. 2
seconds when switching on the instrument
(
button).
The blinking position can be changed by pressing
or confirmed by pressing
.
Power save function
Auto OFF function
is switched on
(“ON”)
If a button has not been pressed in the last 5 minutes or there
is no communication with the PC, the instrument switches off
automatically.
Exceptions:
-
the function is deactivated during timed and multi-point
mean calculation
- Automatic saving mode:
The function is only activated if saving cycles > 1 min are
programmed.
- In the case of an activated function (cycle
>1 min) the instrument switches itself on at the
measurement time and switches off again. This also occurs
if the instrument is switched off via the
button after the saving program has been activated.
BAT: Battery operation
with 9 V block battery, Alkali
manganese IEC 6LR61.
AKKU: Rechargeable battery operation
with Testo
rechargeable battery (Part no. 0515.0025), Type: Ni-MH IEC
6F22. If the
rechargeable battery
is empty: Recharge battery
in external charger (Part no. 0554.0025).
Note:
If the battery/rechargeable battery is removed, the instrument
retains set values (date/time) and memory contents for
approx. 10 minutes. The data is lost after 10 minutes.
The capacity of the battery/rechargeable battery is shown in
the display:
100 %
75 %
50 %
25 % (last segment is flashing: the battery/
rechargeable battery is almost empty)
0 % (change battery/recharge rechargeable
battery). Instrument switches off after 1 min.
B
BA
AT
T
AKKU
A
AK
KK
KU
U
BAt
���
1.888.610.7664
www.
Testo-Direct
.com
