TESTO 320 basic, Instruction Manual

Page: 27 / 54

6 Using the product
27
Calling up the function:
> [ ]] → Device settings → [OK] → Measurement view →
[OK]
Changing the parameter/unit in a line :
1. Select the line: [ ▲ ] , [ ▼ ] → [Edit]
2. Select the parameter: [ ▲ ] , [ ▼ ] → [OK]
3. Select the unit: [ ▲ ] , [ ▼ ] → [OK]
4. Save changes: [OK]
Options:
> [Options] → Number of lines : change the number of
measured values per display page.
> [Options] → Blank line : insert a blank line in front of the
selected line.
> [Options] → Delete line : delete the selected line.
> [Options] → Factory setting : reset the measured value
display to the factory settings.
O2 Oxygen
CO2 Carbon dioxide
qA Flue gas loss without due consideration of the
calorific value range
η Efficiency without consideration of the heat value
range
qA+ Flue gas loss with due consideration of the
calorific value range
η + Efficiency with due consideration of the calorific
value range
CO Carbon monoxide
COunv Carbon monoxide undiluted
λ Air ratio
COumg Ambient carbon monoxide
O2ref Oxygen reference
Draught Draught measurement
∆ P Differential pressure measurement
Dew Pt Flue gas dew point temperature