TESTO 320 basic, Instruction Manual

Page: 26 / 54

6 Using the product
26
6 Using the product
6.1. Performing settings
6.1.1. Assigning the right function key
The right function key can have a function from the Options menu
assigned to it. The menu Options is accessed via the left function
key and is available in many different menus. This assignment is
only valid for the currently opened menu / the opened function.
✓
A menu / function is opened in which the Options menu is
displayed on the left function key.
1. Press [Options] .
2. Select option: [ ▲ ] , [ ▼ ] .
Depending on the menu / function from which the Options menu
was opened, the following functions are available.
3. Assign the selected function to the right function key: Press
[Config. Key] .
6.1.2. Instrument settings
It is assumed that the contents of the chapter First steps
(see First steps , page 20) are known.
Calling up a function:
> [ ] → Device Settings .
see First steps, page 20
6.1.2.1. Measurement view
The parameters/units and the display (number of measured values
shown per display page) can be set.
The settings are only valid for the currently chosen measurement
type, which is indicated by the symbol in the info field.
Total overview of selectable measurement parameters and units
(available selection depends on the set country version and
selected measurement type):
Display Measurement parameter
FT Flue gas temperature
AT Combustion air temperature
GT Instrument temperature