background image

1 Safety and disposal 

 

 

Use only original spare parts from Testo. 

 

Batteries 

 

Improper use of batteries may cause destruction of the batteries, injuries 
due to current surges, fire or the escape of chemicals. 

 

Only use the battery supplied in accordance with the instructions in the 
instruction manual. 

 

Do not charge batteries. Attempting to charge a non-rechargeable battery 
may cause gas to be produced or heat to be generated. That may lead to 
the escape of gases, an explosion and/or possibly to fire. 

 

Do not short batteries. If the positive (+) and negative (-) terminals of a 
battery are directly connected to one another, the battery will be shorted. 
For example, batteries can be shorted when you have them loose in your 
pocket along with keys or coins. This may lead to the escape of gases and 
the leakage of battery acid. 

 

Do not deform batteries. Batteries must not be squashed, drilled, 
dismantled, pierced, modified or damaged in any other way. This may lead 
to the leakage of battery acid, to the escape of gases and/or to an 
explosion. 

 

Do not heat batteries above the permitted temperature or burn them. If a 
battery is heated, this may lead to the leakage of battery acid and/or to an 
explosion. Lithium batteries can, for instance, react very strongly in 
combination with fire. This may involve battery components being emitted 
with considerable power. 

 

Do not consume battery, risk of burns due to hazardous substances. Keep 
new and used batteries away from children. 

 

In principle, contact with escaping battery components may present a risk 
to health and to the environment. Adequate body and breathing protection 
is therefore required when in contact with batteries that have peculiar 
aspects (escaping contents, deformations, discolourations, dents or the 
like). 

 

Do not leave batteries lying around loose once they have been unpacked. If 
batteries that have been unpacked are left lying around loose, they can 
easily short one another, particularly button cells. In some cases, this is very 
dangerous because the batteries may heat up. This may lead to an 
explosion. 

 

Always store batteries in a cool, dry place. 

 

Batteries must be disposed of in accordance with the local and country-
specific regulations. In order to prevent short circuits and the associated 
heating, lithium batteries must never be stored unprotected in bulk. 

Summary of Contents for 190 P1

































Reviews: