3 Product description
10
Display
T2 T3 H1 G1
Maximum acceleration reading, Y axis (
Max
,
y
,
g
)
- - - X
Maximum acceleration reading, Z axis (
Max
,
z
,
g
)
- - - X
Time mark ( )
X X X X
Battery life in days (
)
X X X X
STOP key
✓
Rec
mode and stop criterion Button Stop programmed.
>
Press
STOP
key for approximately 3 seconds to end the
measurement program.
- The measurement program ends:
Mode
status LED flashes red,
End
appears on the display.
START + STOP key
The data loggers may be placed in hibernation mode to prolong the
battery life. In this mode, the status LEDs and the display are
disabled.
✓
WAIT
or
End
operating mode.
>
Press the
START
key and the
STOP
key simultaneously for
approximately 3 seconds.
- Hibernation mode is activated.
3.4.
Important information and glossary of terms
•
Single-use data logger
(versions T1 and T2): the data logger
has a time-limited service life, which begins from the first time
the program is started.
•
Start
and
stop setting
: the criteria for starting and stopping the
program are defined in the configuration file.
One of the criteria must be selected for starting the program.
When selecting the criterion, a time delay can be entered
(program starts x minutes after pressing the key).
Both criteria can also be selected for stopping the program. The
criterion that occurs first stops the program.
•
Measuring interval
: the measurement interval defines the
intervals at which readings are saved.
•
Time mark
: time marks can be set for the documentation,
e.g. when responsibility is transferred to another institution.
Shop for Data Logging products online at:
www.
DataLoggerStore
.com
1.888.610.7664
