8. Settings
15
Setting the emission level:
· When IR measurement is enabled, press and hold down[[
]
and [[
] at the same time (
lights up).
· Emission level is displayed.
· Use [[
] or [[
] to change the value and wait for 3 s.
Contact measurement
- Instrument is on, contact measurement is enabled (
lights
up).
1 Position the contact thermometer in the measurement object
and initiate the measurement: p
press [
].
2 End measurement: p
press [HOLD / MIN / MAX].
- H
Hold lights up. The last measuring value and min./max. value
are saved until the next measurement, or until the instrument is
switched off.
AutoHold function: if this function is enabled, the measurement
is ended automatically as soon as the measuring value is
stable, A
AutoHold lights up.
Switch between min., max. and recorded value:
press [HOLD / MIN / MAX].
The min./max. values can be reset:
· switch the instrument off, switch to IR measurement or, while
the held measuring value is displayed (H
Hold lights up), press
and hold down [[HOLD / MIN / MAX] until C
Clr lights up.
Restart measurement: p
press [
].
8. Settings
- The instrument is switched off.
If no button is pressed for 3 s in settings mode, the instrument
switches to the next view.
1 Press and hold down [[
] and [[
] until A
AutoHold or H
Hold
flashes.
2 Switch the AutoHold function on (A
AutoHold) or off (H
Hold): p
press
[
] or [[
].
- °°C, °°F or °°R flashes.
3 Set measurement unit to degrees Celsius (°°C), degrees
Fahrenheit (°°F) or degrees Réaumur (°°R): p
press [
] or [[
].
-
flashes.
4 Switch the laser on (o
on) or off (o
oFF): p
press [
] or [[
].
- The instrument switches to IR measurement.
de
en
fr
es
it
pt
sv
nl
??
??
1.888.610.7664
www.
Testo-Direct
.com
