Approval and Certification
The use of the wireless module is subject to the regulations
and stipulations of the respective country of use, and the
module may only be used in countries for which a country
certification has been granted. The user and every owner has
the obligation to adhere to these regulations and prerequisites
for use, and acknowledges that the re-sale, export, import etc.
in particular in countries without wireless permits, is his
responsibility.
Product
Testo Gateway (Wireless Sensors) EU
Mat.-No.
0572 2200 01
Model No.
0572 2200 01
Date
07.06.2022
Country
Comments
EFTA
The EU Declaration of Conformity can be
found on the testo homepage www.testo.com
under the product specific downloads.
EU countries:
Belgium (BE), Bulgaria (BG), Denmark (DK),
Germany (DE), Estonia (EE), Finland (FI),
France (FR), Greece (GR), Ireland (IE), Italy
(IT), Latvia (LV), Lithuania (LT), Luxembourg
(LU), Malta (MT), Netherlands (NL), Austria
(AT), Poland (PL), Portugal (PT), Romania
(RO), Sweden (SE), Slovakia (SK), Slovenia
(SI), Spain (ES), Czech Republic (CZ), Hungary
(HU), Republic of Cyprus (CY).
EFTA countries:
Iceland, Liechtenstein, Norway, Switzerland
WEEE Reg. no. DE 75334352
United
Kingdom
(UK)
The UK Declaration of Conformity
can be found on the testo
homepage www.testo.com under
the product specific downloads
.
-Module
Feature
Values
Radio range
up to 200 m (650 feet)
(free field)
Type
Lierda
L-RFOMD41-04594-02
RF Band
865 to 868 MHz
(L-Band)
Output power
12.5 dBm
Antenna gain
Max. -0.15 dBi
Company
Lierda Science &
Technology Group
Co., Ltd
Product
Testo Gateway (Wireless Sensors) FCC
Mat.-No.
0572 2200 02
Model No.
0572 2200 02
Country
Comments
Canada
Product IC: 6127B-0572220002
See IC Warnings
USA
Product FCC ID: WAF-0572220002
See FCC Warnings
-Module
Feature
Values
Radio range
up to 200 m (650 feet)
(free field)
Type
Lierda
L-RFOMD41-04594-02
RF Band
915 to 928 MHz
Modulation
GFSK
Output power
12.5 dBm
Transm. rate
50 kBit/s
Antenna gain
Max. -0.15 dBi
Antenna Part
Number
0440 3002
Company
Lierda Science &
Technology Group
Co., Ltd
IC Warnings
CAN ICES-003(B)/NMB-003(B):
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
RSS-Gen & RSS-247 statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage
(2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Caution: Radio Frequency Radiation Exposure
This equipment complies with radio frequency exposure limits set forth by
the Innovation, Science and Economic Development Canada for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20 cm between the device and the user or bystanders.
Co-Location:
This device must not be co-located or operated in conjunction with any other
antenna or transmitter.
Attention : exposition au rayonnement de radiofréquences
Cet équipement est conforme aux limites d'exposition aux radiofréquences
définies par la Innovation, Sciences et Développement économique Canada
pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de
distance entre le dispositif et l'utilisateur ou des tiers
Co-location
Ce dispositif ne doit pas être utilisé à proximité d’une autre antenne ou d’un
autre émetteur.
FCC Warnings
Information from the FCC (Federal Communications
Commission)
For your own safety
Shielded cables should be used for a composite interface. This is to ensure
continued protection against radio frequency interference.
FCC warning statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Shielded interface cable must be used in order to comply with the emission
limits.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Radio Frequency Radiation Exposure
This equipment complies with radio frequency exposure limits set forth by
the FCC for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20 cm between the device and the user or bystanders.
Co-Location:
This device must not be co-located or operated in conjunction with any other
antenna or transmitter.
Product
产品名称
Testo Gateway (Wireless Sensors) CN
Testo Gateway (Wireless Sensors)
网关
Mat.-No.
料号
0572 2200 03
Model No.
型号
0572 2200 03
Country
Comments
China
Approved
-Module
-
通
讯模块
Feature
特征与参数
Values
数
值
Radio range
无
线电范围
up to 200 m (650 feet)
(free field /
无障碍场地
)
Type
型号
Lierda
L-RFOMD41-04594-02
RF Band
射
频频段
868.0 to 868.6 MHz
Company
制造商
Lierda Science &
Technology Group Co.,
Ltd
Product
Testo Gateway (Wireless Sensors) IN
Mat.-No.
0572 2200 06
Model No.
0572 2200 06
Country
Comments
India
Approved
-Module
Feature
Values
Radio range
up to 200 m (650 feet)
(free field)
Type
Lierda
L-RFOMD41-04594-02
RF Band
865 to 867 MHz
Output power
12.5 dBm
Antenna gain
Max. -0.15 dBi
Company
Lierda Science &
Technology Group
Co., Ltd
Summary of Contents for 0572 2200 Series
Page 16: ...1 2 4 3...