4.4 Connecting a radio data logger
Before you connect a radio data logger to Gateway, please ensure, that
the Gateway is connected to the cloud. You can check the with Saveris
Restaurant Website. See chapter 5!
1. Press the button on the Gateway <3 sec. -> Sensor LED is on and Gateway
is in connect/ join mode!
2. Press the button on the radio logger for < 3 sec in State OFF.
-> Blinking for 90 sec 0,2 sec on 0,8 sec off (green)
-> sensor is in manual join mode
In case of finished join mode (max 90 sec) LED flashes 1x 2 sec green
-> Connection to GW OK
3. Gateway Network LED goes off
4. Connection is established and Sensor is visible with its serial number in the
Software
on the “Online Logger page”.
5
8
7
Summary of Contents for 0572 2200 Series
Page 16: ...1 2 4 3...
