Rev. 01/29/10 MKB
ACL 350
Page 2 of 9
ACL 350 DIGITAL STATIC LOCATOR
Before using this, or any other electronic piece of equipment, carefully read the instruction
manual completely.
I.
BEFORE USING THE INSTRUMENT Examine the instrument for damage,
contamination (excessive dirt, grease, etc.) and defects.
If any abnormal conditions exist, do not attempt to make any measurements.
II.
SAFETY
A. The following safety information must be observed to insure maximum personal
safety during the operation of this meter.
1.
DO NOT use the meter if the meter looks damaged, or if you suspect that
the meter is not operating properly.
2.
DO NOT touch the front sensing head while operating this meter.
3.
Measuring voltage which exceeds the limits of this meter may damage
the meter and expose the operator to a shock hazard. Always recognize
the meter voltage limits as stated.
III.
FUNCTION
The ACL 350 Static Locator is a non-contact meter
that indicates electrostatic field voltage and polarity on
charged surfaces. This easy to use instrument comes
equipped with a Power On/Hold button, a zero button
and a unique retractable one inch spacer. The meter
automatically shuts off after approximately 90
seconds. The unit's grounding path is through its
conductive case, so there is often no need to wear a
grounded wrist strap during normal operations. The
easy to read 3-1/2 digit LCD display automatically
updates three times per second. Measurements are
dependent on the distance from the object being
measured.
IV.
ACCURACY
A. The accuracy of the ACL 350 is dependent upon three factors.
1.
The instrument must be properly grounded and zeroed.
2.
The distance from the front edge of the case to the target or surface
under examination must be accurate and stable.
