Testec TT-SI 7002 Instruction Manual Download Page 11

 

 

 

 

 

 

Man_7002_0919 

          www.testec.de  

    9

 

 

 

 

7 Service & Warranty Information

 

 

 

Limited One-Year Warranty

 

 

Testec Elektronik GmbH warrants these products to be free from defective material 
or workmanship for a period of 1 year from the date of original purchase. Under 
this warranty, Testec Elektronik GmbH is limited to repairing the defective device 
when returned to the factory, shipping charges prepaid, within the warranty 
period.

 

 

Units returned to Testec Elektronik GmbH that have been subject to abuse, 
misuse, damage, or accident, or have been connected, installed, or adjusted 
contrary to the instructions furnished by Testec Elektronik GmbH, or that have 
been repaired by unauthorized persons, will not be covered by this warranty.

 

 

Testec  Elektronik  GmbH  reserves  the  right  to  discontinue  models,  change 
specifications, price, or design of this device at any time without notice and without 
incurring any obligation whatsoever.

 

 

The purchaser agrees to assume all liabilities for any damages and/or bodily injury 
which  may  result  from  the  use  or  misuse  of  this  device  by  the  purchaser,  his 
employees, or agents.

 

 

This warranty is in lieu of all other representations or warranties expressed or 
implied and no agent or representative of Testec Elektronik GmbH is authorized to 
assume any other obligation in connection with the sale and purchase of this 
device.

 

 

Service

 

 

If you have a need for calibration or repair services, technical, or sales support, 
please contact us: 
 

 

    Testec Elektronik GmbH 
    Fritz-Klatte-Str. 6 
    65933 Frankfurt / Germany 
 
    Tel.: +49 (0) 69 – 9433350 
    E-Mail: [email protected] 
    www.testec.de 

 
 
 

 

Summary of Contents for TT-SI 7002













Reviews: