Test Equipment Depot XFTP SAT LITE, Operation Manual

Page: 25 / 32

25
XFTP SAT LITE Satellite Meter - Operation Manual
Satellite Longitude
The satellite longitude is the position of the satellite over the earth.
To change the satellite longitude, use the or Direction Buttons
to highlight the
L Field, then press the Direction Button or
ENTER
Button.
To change the satellite longitude, use the alphanumeric keypad to
enter the new value, and then press the Direction Button or
ENTER
Button to complete your changes.
The satellite longitude is from -180° to +180°, where east longitude is
positive and west longitude is negative.
22 KHz Status Switch
The 22 KHz status switch is sometimes used when the satellite dish
being used has multiple LNBs. If there is only one LNB being used,
the switch should be
Off .
To change the status of the 22 KHz switch, use the or Direction
Buttons to highlight the
22KHz Field, then press the Direction
Button or
ENTER
Button to choose from Off or On .