Test Equipment Depot XFTP SAT LITE, Operation Manual

Page: 15 / 32

15
XFTP SAT LITE Satellite Meter - Operation Manual
Power Saving
To change the power saving selection, press the
F3
Button, the
instrument will display the power settings screen as shown in the
figure below.
Press the Button to move down to highlight the Shutdown Field as
shown in the following figure.
To change the power saving setting, press the
ENTER
Button or the
F4
Button repeatedly to scroll through the following options;
always , 3m , 10m , or 30m .
When you select always , the instrument will always remain on. When
you select 3m , 10m , or 30m ; the instrument will shutdown after the
specified amount of time as described below.
When the power saving feature is activated and the user has not
performed any keyboard actions, the instrument will beep three times
as the idle time approaches the user determined shutdown time. If the
user doesn’t press any keyboard buttons and the idle time exceeds
the user determined shutdown time, the instrument will beep three
times and then automatically shut down.