7
How to put a Pause in a Stored Number:
It may be necessary to program a pause into the dialing sequence.
Programming a pause into memory will cause the phone to wait 3
seconds before dialing any more numbers.
For example, a pause may be necessary when in an office and
accessing an outside line. You can do this by pressing the RD/P
button at the point where the pause is required. For example, to store
the number 2-9429441 with a pause between the 2 and 9, enter 2 and
press (RD/P) 9429441. Each pause will count as one digit. A longer
pause can be inserted by pressing RD/P more than once.
How to Dial a Stored Number:
After receiving a dial tone, press MEM and the number key (0~9) for
the memory location in which the number is stored. For example, to
call the number stored in memory location 1,
press MEM and then
the number 1. The number will be dialed automatically.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Summary of Contents for teletalker 330
Page 4: ...3...
