TESSERA CF-850/F1KM-176-S, Hardware Manual

Page: 25 / 26

- 25 -
2.6.7 Filter socket
Filters can be implemented to A/D input terminals.
Connects (CN1, CN2) are connected through the sockets as illustrated below. Therefore, please
make sure you connect resistor between the socket 4pin and 5pin when you use A/D terminal.
Socket Socket
AP0_0/ADCA0I0 AP0_0 AP1_0/ADCA1I0 AP1_0
AP0_1/ADCA0I1 AP0_1 AP1_1/ADCA1I1 AP1_1
AP0_2/ADCA0I2 AP0_2 AP1_2/ADCA1I2 AP1_2
AP0_3/ADCA0I3 AP0_3 AP1_3/ADCA1I3 AP1_3
AP0_4/ADCA0I4 AP0_4 AP1_4/ADCA1I4 AP1_4
AP0_5/ADCA0I5 AP0_5 AP1_5/ADCA1I5 AP1_5
AP0_6/ADCA0I6 AP0_6 AP1_6/ADCA1I6 AP1_6
AP0_7/ADCA0I7 AP0_7 AP1_7/ADCA1I7 AP1_7
2.6.8 Check Pin
Since all I / O ports excluding the CPU's OCD shared terminal are connected, observation
of signals and signal input from the outside can be easily done. Refer to circuit diagram for
signal placement.
J1
Socket
1 2 3 4 5
Connector CPU