Most metal detectorists prefer to use headphones instead of the detector's built-in speaker.
Headphones help block out background noise (such as wind) and make it easier to hear faint
signals. Headphones with a built-in volume control will allow you to adjust the sound volume to
your preference.
SPECIFICATIONS
Operating Frequency
10.6 kHz
Searchcoil Type
Round, open center concentric
Searchcoil Size
8" diameter
Cable Length
Approx. 3’
Audio Frequency
Approx. 630 Hz
Audio Output
1½” speaker and headphone jack
Headphone Compatibility
¼” stereo plug
Weight (may vary slightly)
2.2 lbs.
Battery Requirement
One 9 volt DC (alkaline)
Battery Life (typical)
10 to 20 hours
Optimum Temperature Range 30° to 100° F
Optimum Humidity
0 to 75% R.H.
Operating Modes
No-motion All Metal
Silent Search Discriminate
Silent Search All Metal
METAL DETECTORIST'S CODE OF ETHICS
1.
Always check federal, state, county and local laws before searching. It is your
responsibility to “know the law.”
2.
Abide by all laws, ordinances or regulations that may govern your search and the area
you will be in.
3.
Never trespass. Always obtain permission prior to entering private property, mineral
claims, or underwater salvage leases.
4.
Do not damage, deface, destroy, or vandalize any property, including ghost towns and
deserted structures, and never tamper with any equipment at the site.
5.
Never litter. Always pack out what you take in and remove all trash dug in your search.
6.
Fill all holes, regardless how remote the location. Never dig in a way that will damage, be
damaging to, or kill any vegetation.
7.
Do not build fires, camp at or park in non-designated or restricted areas.
8.
Leave all gates and other accesses to land as found.
