Tesmec FRB616, Installation, Operation And Maintenence Handbook

Page: 31 / 102

TENSIONER
Model: FRB616
Manual: MI-FRB616-020-01-GB Date: 11.03.2015 Author: M. Colleoni Page: 28 of 33
7. MAINTENANCE
7.1 GENERAL PRESCRIPTIONS
ATTENTION: possible repairs not carried out by the manufacturer and not allowed by a
written authorization relieve the manufacturer for any responsibility in case of accidents to
persons or damages to things and/or to the machine, causing also the loss of warranty.
7.2 LEVELS CONTROL
For safety reasons, during the transport machine comes without hydraulic oil and fuel.
Fill the levels as per the following table:
Quantity
a. Hydraulic oil level (table 1, pos. 6) 260 l
b. Diesel engine oil level (see enclosed booklet)
c. Fuel level 50 l
d. Gears grease (table 1, pos. 1, 2) 2 kg
e. Negative safety brake oil level (table 2, pos. 9) 0,3 l
f. Reduction gear oil level (table 2, pos. 7)
2.6 l
ATTENTION: the non-respect of the correct levels causes serious damages to the installed
components.
DANGER: do not ingest hydraulic liquids because injurious to health and potentially lethal.
7.3 TYRES INFLATION PRESSURE
Tires inflation pressure has to be 7 bars.
ATTENTION: the non-respect of tyres inflation pressure causes dangerous situations during
transport operations.
7.4 SUGGESTED LUBRICANTS
The manufacturer tests the machine with the following oils and lubricants:
a. hydraulic circuit, negative safety brake and reduction gear: IP HYDRUS OIL 46 (ISO VG 46)
b. coupling gear: IP MELLANA 220 (ISO CKC 220).
Possible different trademarks must be chosen based on the enclosed table "SUGGESTED
LUBRICANTS". It is possible to use different trademarks but with same characteristics and ISO
specifications.
When using oil with characteristics and ISO specifications different from the ones declared during test,
completely empty out the hydraulic circuit.
ATTENTION: the use of lubricants not in conformity with the technical specifications indicated
in the present manual seriously damages the machine components and, consequently, the
warranty conditions are not valid.