TROLLEY
Model: CRT160/CRT161
2
1.3 INTRODUCTION
This manual contains the necessary information for the use and the maintenance of the
TESMEC equipment.
To get the optimum performance and the correct working of the machine please follow these
instructions.
Due to TESMEC’s program of constant improvement, materials and specifications are
subjected to change without notice or obligation.
THE REPRODUCTION, EVEN PARTIAL, OF THE PICTURES AND/OR THE TEXT IS
FORBIDDEN.
1.3.1 CARE OF THE INSTRUCTION MANUAL
a)
Before using the equipment the chief of the job site and the operator must read the
instruction manual.
b)
The information contained in the instruction manual applies to all the operators charged
with the use and/or the maintenance of the equipment.
c)
The chief of the job site is obliged to inform all the operators about the instructions
contained in the manual.
In particular, it is necessary that before using the equipment the operator know exactly the
operations to be carried out.
Moreover the operator must be able to carry out all the operations described in the manual,
being sure to have understood the safety directives and to apply them correctly during the
use and maintenance operations.
The operator must know the directives for accident prevention.
d)
The chief of the job site must verify that the instructions contained in the manual are
applied.
e)
The instruction manual must be kept, in order to be consulted, for all the life of the
equipment and also when it is given to another user.
f)
The instruction manual must be kept in a sheltered and dry place.
g)
The instruction manual is not a training manual.
1.3.2 RESPONSIBILITY
a)
Only employed and qualified operators must use the equipment.
b)
The equipment must be used
only
for the work it was designed for.
c)
The manufacturer is not responsible for any use not in compliance with the given
instructions that could cause damages to persons and/or things:
•
improper use of the equipment or for the consequences caused by tampering and/or
modifications carried out without the manufacturer’s written acceptance
•
use of not original spare parts
•
bad maintenance
•
total or partial non-performance of the instructions for use.
