Tesla VCR600W, User Manual

Page: 16 / 174

16
TROUBLESHOOTING
Prompt Tone Solution
Error 1: I cannot find the dust collector Cleaning is triggered when the dust box is take out
Error 2: Please check if the radar on top has been covered or blocked The top radar is covered or placed in an open area (there is not obstacle within an area of 6×6m2)
Error 3: Please place me in a new location and try again Pick the robot up or move it to another location
Error 4: Please clean the cliff sensor, and restart me from a new location The cliff sensor is covered or placed at height
Error 5: Please clean the front sensor, and restart me from a new location The infrared avoidance sensor is dirty or covered
Error 6: Please clean the right-hand sensor, and restart me from a new location The wall sensor is dirty or covered
Error 7: Please clean the radar housing on top, and restart me from a new location The radar avoidance sensor is dirty or covered
Error 8: Please check if the bumper has been blocked in some way The edge or collision sensor is stuck
Error 9: Please clean the dust container and filter The dust box is full or the filter screen needs to be replaced
Error 10: Dust container has been removed, please clean the container and filter After error 9 is issued, user takes out the duct chamber and error 10 is triggered
Error 11: I'm stuck The robot is stuck
Error 12: Please place me correctly! The robot is tilt
Error 13: Please check if my wheels have become blocked somewhere The driving wheel is stuck or twined, please remove the foreign matters
Error 14: Please check if the main brush has become stuck The main brush is twined or stuck, please remove it and remove the foreign matters
Error 15: Please check if the side brushes has become stuck The side brush is twined or stuck, please remove it and remove the foreign matters
Error 16: Where is the docking station The charging base cannot out found or is not plugged in
Error 17: Program error, please restart me Abnormalities are caused by unknown breakdown, restart the robot
Error 18: Error encountered initiating shutdown The robot reminds the user and shuts down automatically or is recharged
Error 19: Low battery, please recharge
When the battery level is to o low and the robot is not on the charging base, cleaning is
triggered (the battery level is lower than 10%)
Error 20: Remove from charging station for power off The robot shuts down when charged on the charging base