7
In order to replace the filter on time, before using air purifier, please keep the date
recorded in the back of the nameplate, thus to achieve the best performance.
After removing the plastic package of each filter, the efficient HEPA filter and
activated carbon filter must be replaced once a year. Photocatalyst filter should be
replaced every three years, after a period of time, should exposure under UV for
more then 2 hours.
To know the air quality indicator
Air quality indicator can reflect the air quality conditions, please refer to the speci-
fic page 6 and page 14.
3. BEFORE USE
RECORD THE BEGINNING USE DATE IN THE LABEL
TIPS
Name plate and notes
Air quality color indicator
10cm
50cm
50cm
Method of dismounting and installing the air
inlet panel
1. Method of removing the air inlet Panel.
Hold on to the groove at both sides of the air
inlet panel, then gently pull it up.
2. Method of installing the air inlet panel.
Reinstall the air inlet panel, alignment and insert
it into the fixed groove, and then gently push
it up.
Placement sites of air purifier
In order to make your room air to achieve good
effect on both sides of the cycle, to ensure the
gap between the air inlet and the wall at least
50 cm, the air outlet at least 10 cm. Please keep
1 meter away from television, radio, etc.
Please do not put the power plug together with
the television, radio and other electrical power
plug inserted into the same socket, (otherwise it
may cause screen jitter and noise generated.)
• The long-term placement in the same sites
may dirty the host walls.
• To ensure the machines have adequate
ventilation and maximum efficiency, don‘t
interfere with the air outlet and air inlet.
1
2
