TI3100A Digital Volt/Amp Meter (DVAM)
9
Section 5 – Operation Procedures
5.1 – Measuring a Vehicle’s Start-Up Draw
When starting a vehicle with a Tesla™ Turbo Start™, the DVAM can be connected to measure the amount
of current needed to start the vehicle. Because of the Turbo Start’s advanced electronics, the amount of
current a vehicle requires is matched by our system. When starting a vehicle the amperage will peak and
then level off depending on the vehicle’s current consumption curve.
5.2 – System Testing
The DVAM and Turbo Start™ can be used to check vehicles systems when individual systems are isolated.
First turn off all non-related systems.
•
Turn on individual system to be measured, then check current draw displayed on DVAM. Utilizing the
•
proper military maintenance manual, compare the meter reading with the factory specifications for that
system.
5.3 – Post Operation
Disconnect DVAM and store in case.
5.4 – Unit Care
Keep DVAM in case when not in use. Keep system clean and guard from moisture.