![background image](http://html1.mh-extra.com/html/tesla/ti2000-009/ti2000-009_user-manual_1091571014.webp)
TI2000-009 Transformer
11
Section 6 - Operating Procedures
6.1 – General
This section defines the operating procedures, which includes all steps necessary to ensure safe and efficient
operation.
Correct operation of the TI2000-009 includes both pre-use and operational checks of the unit. Knowledge
of the operating limits, restrictions, performance, unit capabilities and functions is fundamental to correct
and safe operation. The operator shall ensure compliance with the instructions in this manual that affect
operational safety and the warranty of the unit.
6.2 – Operating Limits and Restrictions
The minimum, maximum and normal operating ranges result from careful engineering and evaluation of test
data. These limitations must be adhered to during all phases of operation.
WARNING
FIRE/EXPLOSION HAZARD POTENTIAL
Severe injury or death from fire or explosion can occur if electrical sparks are produced near fuel vapors. To
prevent this, make sure electrical outlets are switched to “OFF” position before connecting electrical plugs.
For added safety, this unit shall not be operated during any aircraft fuel handling operation.
6.3 – Connect to VAC Power
Plug the transformers VAC input plug into the appropriate 480 three phase VAC outlet. All three phase lights
will come on. If all three lights do not activate then there is a problem with the AC power source. Disconnect
the unit and troubleshoot the power source.
CAUTION
!
Unit may be damaged if incorrect AC power is applied. The transformer
must be plugged into a 480 three phase VAC power source.
Figure 6.3.1 Transformer connected to VAC Power
Summary of Contents for TI2000-009
Page 25: ......