![background image](http://html1.mh-extra.com/html/tesla/ti15014-120-240/ti15014-120-240_user-manual_1091224019.webp)
TI150 Series Battery Charger/Conditioner
14
4
Pre-Operation Procedures
Connecting and Disconnecting the Quick Disconnect DC Cable
The TI2010-095 12/24 V Cable Assembly is equipped with a female Quick Disconnect connector. The
TI2010-095 12/24 V Quick Disconnect Cable Assembly with Ring Terminals and the TI2010-096 12/24 V
Quick Disconnect Cable
Assembly with Alligator Clips are equipped with the male side of the connector.
To connect the ends:
Hold the male end of the connector in one hand, and the
1.
female in the other. Note that the white plastic covers around
the pins and sockets are “D” shaped.
Align the pins and sockets so that the “D” shapes are facing
2.
the same direction.
Slide the pins into the sockets until the two side latches
3.
on the until the two side latches on the male end click into
place. Gently pull on each end to ensure that the two ends
are locked together.
Gently pull on each end to ensure that the two ends are
4.
locked together.
Figure 4.3.4 –
Female end of
connector
Figure 4.3.3 – Male
end of connector
Figure 4.3.5 – Correctly connected ends
To disconnect the ends:
Hold the male end of the connector in one hand, and
1.
the female in the other.
Gently press them together
2.
Grasp the two side latches of the male connector and
3.
press them together until latches clear the catch.
While holdings the latches, pull the ends apart.
4.
Figure 4.3.6 –
Disconnecting the
ends
Summary of Contents for TI15014-120-240
Page 34: ......