![background image](http://html.mh-extra.com/html/tesla/series-3/series-3_operating-instruction_1091091017.webp)
17
ENG
Installation
Program Edit
Edit the programs. You can press colored buttons on the remote control to skip programs,
delete programs , and add programs to the favorite list by pressing FAV button.
5V Antenna Power
This option is only available in DVB-T/T2 source, select On to supply power for the TV’s
antenna; Select Off to turn off this function.
CI Information (Only available in DTV mode)
Enables the user to select from the CAM-provided menu. Select the CI menu based on the
menu PC Card.
Signal Information
Showing the information of current DTV channel.
Auto Tuning
Select corresponding source from the source list before starting the auto tuning.
• DVB-S/S2 Auto Tuning
Satellite Dish Settings (Step 1-3, refer to Fig1 and Fig2)
A set of satellite dish settings must be configured for each wanted satellite before
performing a channel scan.
Satellite
- Select the satellite for this TV.
Long Cable
- Increase LNB power.
LNB Type
- Make sure the LNB type is corresponding to your dish.
LNB Power
- Enable or disable the power supply for the LNB.
22KHz
- Select the 22KHz to set 22K switch to ON/OFF. The auto mode is used to switch
22KHz on or off depending on the LNB type.
DiSEqC1.0/1.1
- Select the DiSEqC mode for the selected LNB.
Unicable/IF Freq/ Set Position
- Setting the unicable parameter depend on your disk.
Fig. 1